Clock Time; Displaying The Time; Setting The Clock Automatically; Setting The Clock Manually - Blaupunkt ACAPULCO MP54 7 644 250 310 Operating Instructions Manual

CD CHANGER MODE
Press the or
edly until "CD NAME EDIT" ap-
pears in the display.
Press and hold down the MENU
button 9. After four seconds you
will hear a beep and "DELETE
NAME" appears in the display.
Continue holding the button
pressed down until you hear a sec-
ond beep and "DELETE ALL" ap-
pears in the display.
Let go of the MENU button 9.
All CD names will be deleted.
Press the OK button : to return to
the menu.
button 7 repeat-

CLOCK time

Displaying the time

You can make the clock time appear
continuously in the bottom part of the
display while any audio source is acti-
vated. For further information, please
read the "Configuring the display" sec-
tions in the relevant chapters.

Setting the clock automatically

You can configure the system to set the
clock time automatically using the RDS
signal.
Press the MENU button 9.
Press the or
edly until "CLOCK MENU" appears
in the display.
Press the OK button :.
Press the or
edly until "CLOCK AUTO" or
"CLOCK MANUAL" appears in the
display.
Select the "CLOCK AUTO" setting
using the or
Press the MENU button 9.
The menu appears again.

Setting the clock manually

To set the clock time manually,
press the MENU button 9.
Press the or
edly until "CLOCK MENU" appears
in the display.
Press the OK button :.
CLOCK TIME
button 7 repeat-
button 7 repeat-
button 7.
button 7 repeat-
75