The printing location has slipped.
Cause 1
Remedy
Cause 2
Remedy
Data that should be printed on the same page is printed on two separate pages.
3
Cause
Remedy
3-6
Printing Problems
Margin, Offset X, or Offset Y in the printer settings menu have been changed.
Set Margin, Offset X, and Offset Y to '0.0' and print the data again. (See "Margin," on p. 2-10,
and "Offset X/Offset Y," on p. 2-12.)
The application software' s top margin and paper location settings are not correct.
Set the correct settings for the top margin and the paper location and print the data again.
(See the application software manual.)
The application software's "Line spacing" and "Number of lines on a page" settings are not
correct.
Change the settings so that the data fits on one page and print the data again. (See the
application software manual.)