Manually Transmitting Dtmf Tones; Transmitting Dtmf Tones From Memory - Radio Shack HTX-242 Owner's Manual

All manuals and user guides at all-guides.com

Manually Transmitting DTMF Tones

To transmit DTMF tones, follow the steps for transmitting. Then,
while holding down PTT, press the digits on the microphone to
transmit the tones.
Note: If auto-reply is turned on, you must hold down PTT while you trans-
!
mit. If auto-reply is off, you can release PTT after you enter the first digit.
The HTX-242 transmits for 1 second after you enter the last digit. See
"Using Auto-Reply" on Page 34.

Transmitting DTMF Tones from Memory

1. Press
DTMF
DTMF memory number.
2. To select a different DTMF memory, press and hold
least 1 second. Then press
3. Rotate
TUNE
memory.
4. Press and hold PTT. Then press
DTMF memory.
Notes:
• If you turn on the DTMF auto send option and turn on DTMF mem-
! ory ( DTMF
sequence in the current memory every time you press PTT. See
"Using DTMF Auto Send" on Page 35.
• To store DTMF sequences, see "Storing a DTMF Sequence" on
Page 32.
so the HTX-242 displays
.
DTMF
or press or to select the desired DTMF
DTMF
appears on the display), the HTX-242 sends the DTMF
and the current
DTMF
for at
F
to send the current
23