Changing The Default Offset; Reversing The Offset; Overriding The Duplex Offset - Radio Shack HTX-242 Owner's Manual

All manuals and user guides at all-guides.com

Changing the Default Offset

Follow these steps to change the default offset for the VFO modes.
1. Press
2. Hold
3. Press
(in MHz).
4. Rotate
directly enter the step using the microphone's keypad to
select an offset default (from 0 to 38 MHz).
5. Press
!
Note: This setting does not affect frequencies already stored in memory.

Reversing the Offset

To reverse the transmit and receive frequencies when you operate
duplex, press
(which has a – offset), pressing
receive on 146.340 and transmit on 146.940. The setting returns
to the default if you change frequencies.

Overriding the Duplex Offset

When you tune to a frequency, the HTX-242 automatically selects
either simplex operation, or duplex operation with the correct off-
set direction (if the auto duplex option is on). To override this set-
ting, press
between +, –, and no offset. The setting returns to the default if you
change frequencies.
26
.
VFO
for at least 1 second.
FUNC
F
. The HTX-242 displays
SHIFT
, press or
TUNE UP DOWN
or PTT to save the setting.
SHIFT
then . For example, if you tune to 146.940
F REV
then
F
. Each time you press
SHIFT
flashes.
oS and the current offset
on the microphone, or
makes the transceiver
REV
, the offset switches
SHIFT