Manually Transmitting Dtmf Tones; Transmitting Dtmf Tones From Memory - Radio Shack HTX-242 Owner's Manual

Manually Transmitting DTMF Tones

To transmit DTMF tones, follow the steps for transmitting. Then,
while holding down PTT, press the digits on the microphone to
transmit the tones.
Note: If auto-reply is turned on, you must hold down PTT while you trans-
!
mit. If auto-reply is off, you can release PTT after you enter the first digit.
The HTX-242 transmits for 1 second after you enter the last digit. See
"Using Auto-Reply" on Page 34.

Transmitting DTMF Tones from Memory

1. Press
DTMF
DTMF memory number.
2. To select a different DTMF memory, press and hold
least 1 second. Then press
3. Rotate
memory.
4. Press and hold PTT. Then press
DTMF memory.
Notes:
•
If you turn on the DTMF auto send option and turn on DTMF mem-
ory ( DTMF
!
sequence in the current memory every time you press PTT. See
"Using DTMF Auto Send" on Page 35.
•
To store DTMF sequences, see "Storing a DTMF Sequence" on
Page 32.
so the HTX-242 displays
DTMF
or press or
TUNE
appears on the display), the HTX-242 sends the DTMF
DTMF and the current
F
.
to select the desired DTMF
to send the current
DTMF
for at
23