Abbreviations And Symbols - A&D AND TM-2657P Instruction Manual

ABBREVIATIONS AND SYMBOLS

3.
Abbreviation/
Symbol
Alternating current
mmHg
Blood pressure unit
/min. Heartbeats per minute
---
Displayed when measurement is not possible
SYS
Systolic blood pressure (Used for table printing)
Mean arterial blood pressure
MAP
(Used for printing, depending on settings)
DIA Diastolic blood pressure (Used for table printing)
PUL Pulse (used for table printing)
Measurement time (used for table printing)
Irregular Heartbeat symbol (IHB)
Appears when an irregular heartbeat is detected. The mark is printed
when a very slight vibration like shivering or shaking is detected.
Read the description about irregular heartbeat on the next page.
Power off (disconnected from the power source)
Power on (connected to the power source)
Serial number
Date of manufacture
RS-232C serial interface
EC directive medical device label
WEEE label
EU authorized representative
Manufacturer
Exx
Error code display (xx=00 to 99)
Displays extent of electric shock protection: B-type applied part
Follow Instructions for use
Displays the measurement status. "MEASUREMENT IN PROGRESS".
Displays the measurement status. "TAKE MEASUREMENT AGAIN"
FAST STOP for rebooting the device.
Caution: "Please do not pull printer paper during printing."
Caution: "The printer paper is automatically cut."
"POWER" switch.
Used to change functions.
Used to change function setting.
Used to display the number of measurements to date.
Describes how to change printer paper.
To indicate generally elevated, potentially hazardous, levels of
non-ionizing radiation, or to indicate equipment or systems e.g. in the
medical electrical area that include RF transmitters or that intentionally
apply RF electromagnetic energy for diagnosis or treatment.
Meaning
4