Fagor VFI400I Instruction Manual page 28

Place the hob alongside the cavity in
3
the worktop and connect the power
cable to the electrical socket.
IMPORTANT: Carry out connection
with the power disconnected. There
must be a good grounding connection
and a switch must be provided in an
accessible place to isolate all phases,
with at least 3mm. clearance between
contacts. The makers will not accept responsability
for installations carried out other than as directed
here.
It is equipped with a power input cable for high
temperatures.
If a new power input cable is required, installation
should be performed by a technician certificated by
the maker.
Next insert the hob in the worktop
4
cavity, pressing down firmly to ensure a
good seal.
5
Fix the 4 clamps underneath the hob to
the 4 corners of the cavity.
(Clamps, brackets and nuts supplied in
acessory bag).
NOTE: This equipment complies with satnadard 82/499/CE on radio interferences.
INSTALLATION
26