Option settings
Use the F and G buttons on the
projector or remote control unit to
select an item, then press the I or
H buttons to change the setting.
O P T I O N 1
O S D
O N
A U T O K E Y S T N
O N
A U T O Y • P B • P R
O N
A U T O R G B I N
O N
R G B 2 S E L E C T
I N P U T
R G B F O R M A T
Y • P B • P R
S E L C T
A D J
E S C
O P T I O N 2
B A C K C O L O R
B L U E
F R O N T / R E A R
F R O N T
D E S K / C E I L I N G
D E S K
L A M P P O W E R
H I G H
L A M P R U N T I M E
1 0 H
F U N C 1
I N D E X
S E L C T
A D J
E S C
OSD
ON
The current input name is displayed
in the top-right corner of the screen
when the input signal is changed.
OFF
Use this setting when you do not
want the current input name to be
displayed.
AUTO KEYSTN
This should normally be set to ON.
ON
During automatic setup, the angle of
tilt of the projector is detected and
keystone distortion is corrected
automatically.
OFF
Use this setting when you do not
want automatic keystone correction
to be carried out during automatic
setup, such as when the screen
itself is at an angle.
36-E
NGLISH
All manuals and user guides at all-guides.com
AUTO Y·PB·PR
AUTO Y·PB·PR
Input
signal
ON
RGB or YP
P
is
B
R
selected
HDTV60
automatically
depending on the
HDTV50
synchronising
signal status.
RGB or YP
selected automatically
Other
depending on the
synchronising signal
status.
AUTO RGB IN
This should normally be set to ON.
ON
During automatic setup, the
projector selects whichever one of
the RGB1 IN or RGB2 IN
connectors has a signal being input,
and uses that signal for projection.
(If a picture is being projected, the
signal source is not automatically
changed.)
OFF
Use this setting when you do not
want the signal source to be
changed automatically during
automatic setup.
RGB2 SELECT
R G B 2 S E L E C T
I N P U T
O U T P U T
This setting is used to select the
function of the RGB2 IN/RGB1 OUT
connector.
OFF
RGB
format
setting
becomes
valid
P
is
B
R
[
RGB FORMAT
R G B F O R M A T
R G B
[
Y • P B • P R
This setting is only valid when
HDTV signal is being input and
"AUTO Y·PB·PR" is set to OFF
BACK COLOR
B A C K C O L O R
B L U E
[
B L A C K
This sets the colour which is
projected onto the screen whe
signal is being input to the pro
FRONT/REAR
F R O N T / R E A R
F R O N T
[
R E A R
This setting should be change
accordance with the projector
setting-up method.
Set to "FRONT" when using a
normal reflective screen with t
projector positioned in front of
screen, and set to "REAR" wh
using a translucent screen with
projector positioned behind the
screen.
DESK/CEILING
D E S K / C E I L I N G
D E S K
[
C E I L I N G
This setting should be change
accordance with the projector
setting-up method.
Set to "DESK" when setting up
projector on a desk or similar,
set to "CEILING" when suspen
the projector from the ceiling u
the ceiling bracket which is so
separately.