Table of Contents
Advertisement
keystone correction required is
as minimal as possible.
B The picture size will also change
when correction of keystone
distortion is carried out.
B The ratio of length and width of
an image may become incorrect
depending on the amount of the
keystone correction.
B Keystone distortion of the on-
screen display will not be
corrected.
B Keystone distortion may remain
depending on the lens shift
adjustment.
Changing the display language
# Press the MENU button to display the menu screen.
$ Select the "LANGUAGE" menu from the main menu, and then press
the ENTER button.
% Press the F F or G G button to select a language, and then press the
ENTER button.
Indicates the language which
is currently set
50-E
NGLISH
AUTO SETUP
(PC only)
"H-POSITION", "V-POSITION",
"DOT CLOCK" and "CLOCK
PHASE" are automatically adjusted
according to the input signal.
Option settings
# Press the MENU button to display the menu screen.
$ Select the "OPTION" menu from the main menu, and then press the
ENTER button.
% Press the F or G button to select an item.
& Press the I or H button to change the setting.
OSD
ON
The signal name is displayed in the
top-right corner of the screen when
the input signal is changed.
OFF
Use this setting when you do not
want the signal name to be
displayed.
NOTE:
B The setting for "TV-SYSTEM"
will also be displayed when an
S-VIDEO/VIDEO signal is being
input.
OSD DESIGN
You can select the background for
the OSD from 3 types.
TYPE1
Transparent black
TYPE2
Solid blue
TYPE3
Transparent navy blue
OSD POSITION
You can select the position where
the OSD is displayed.
E
-51
NGLISH
Advertisement
Table of Contents
