Audiovox D1700 Owner's Manual page 49

Configuration III: Audio Signal Output from AV Jack
AV Signal
Output
AV Signal
Input
Amplifier, Tape Recorder, etc
Audio output is delivered at stable amplitude and cannot be
increased or decreased using the player's volume control. Use
the volume control onboard the equipment receiving the signal
input to control sound volume.
Most input jacks are of the 3.5 or 5mm specification. When your
peripheral is of the latter type, you should purchase an RCA-
type adapter.
When using only the red and white
AV signal cables, the player can
output dual track high-quality au-
dio signals to at least the following
peripherals:
1. Amplifiers
2. Two-track and reel-to-reel tape
recorders
3. Digital magnetic tape recorders
(DAT)
4. Mini Disc CDR player/recorders
Once connected the external au-
dio equipment can be used to
record or play the music from this
player.
10. Connecting AV Peripherals
Configuration VI: Digital Audio Signal Output
S-Video Digital Signal
Output
Digital Input
Digital Amplifier or
Decoder
Digital Amplifier or Decoder
To output S-Video signals your player must be on AC power
(power cord), not on DC batteries.
Through the optical port located
on the side of the player, audio
signals from a disc can be deliv-
ered to a peripheral with digital
decoding capability via the Digi-
tal Optical Fibre signal cable.
This port can also be used to
transmit disc codes for the
following:
1. Dolby AC-3 Surround Sound
2. DTS (Digital Theater System)
Sound
49