Removing 2.5-Inch Pcie Ssd Modules - Fujitsu PRIMERGY RX2530 M6 Upgrade And Maintenance Manual

▶ If applicable,
"Installing the front cover with lock" on page
7.5.6

Removing 2.5-inch PCIe SSD modules

Customer Replaceable
Unit (CRU)
Tools: tool-less
This procedure is valid, if the PCIe SSD module is controlled by an
onboard controller and the VMD function is enabled in the BIOS. For
more information, see the "Intel Virtual RAID on CPU (Intel VROC) User
Guide".
If the PCIe SSD module is controlled by a RAID controller of the PRAID
EP5xxi/CP5xxi/EP6xxi family, the PCIe SSD module can be installed
during operation (hot-plug), see
modules" on page
Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶ Identify the physical location of the PCIe SSD module, see
SSD configurations" on page
▶ Prepare the removing of the PCIe SSD module.
▶ Depending on your configuration and OS:
page 48.
RX2530 M6
Hard disk drive (HDD) / solid state disk (SSD)
"Removing 2.5-inch HDD/SSD
142.
138.
Upgrade and Maintenance Manual
66.
Hardware: 5 minutes
48.
"2.5-inch HDD/
"Shutting down the server" on
149