Fujitsu PRIMERGY RX2530 M6 Upgrade And Maintenance Manual page 147

Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶ Locate the correct drive bay, see
page 138.
▶ Depending on your configuration and OS:
page 48.
Removing a 2.5-inch HDD/SSD dummy module
Figure 63: Removing a 2.5-inch HDD/SSD dummy module
▶ Press both tabs together (1) and pull the dummy module out of its bay (2).
CAUTION
▶
Keep the dummy module for future use.
▶
Always replace dummy modules into unused HDD/SSD bays to
comply with applicable EMC regulations and satisfy cooling
requirements.
RX2530 M6
Hard disk drive (HDD) / solid state disk (SSD)
"2.5-inch HDD/SSD configurations" on
Upgrade and Maintenance Manual
48.
"Shutting down the server" on
147