Replacing The Uv Lamp - Therapure TPP640S Manual

30
en

REPLACING THE UV LAMP

Before replacing the UV lamp, make sure the
Therapure® TPP640S air purifier is turned off
and unplugged. Let the lamp cool down for 5 min-
utes before replacing it.
1. Release the inlet grill by pressing on the locking
latch.
2. Grasp the left and right frames of the filter
through the indentations on the sides of the filter
enclosure and remove filter.
3. Remove the two bolts used to fix the UV lamp
cover and remove the cover out from the unit,
then unscrew the old UV lamp from the lamp base
of the unit.
4. Install the new UV lamp into the lamp base of the
unit.
5. Install the UV lamp cover with the two bolts on
the unit.
6. Install the inlet grill on the unit.