Graco Therm-O-Flow C03509 Instructions-Parts List Manual page 12

Flushing Safety
WARNING
Use fluids and solvents that are chemically compat-
ible with the equipment wetted parts. See the
Technical Data sections of all the equipment
manuals. Always read the material manufacturer's
literature before using fluid or solvent in this pump.
Before flushing:
1. Ensure entire system and flushing drums or pails
are properly grounded. See system manual or
supply unit manual for more information.
WARNING
To reduce the risk of serious injury, whenever you
are instructed to relieve pressure always follow the
Pressure Relief Procedure on page 11.
12 310530
Operation
2. Perform the Pressure Relief Procedure on
page 11.
and the drum or pail during flushing to reduce the
risk of fluid injection injury, static sparking and
splashing.
3. Remove spray tip/nozzle from spray gun/dispens-
ing valve.
WARNING
PRESSURIZED FLUID HAZARD
Always use the lowest possible fluid
pressure, and maintain firm metal-to-
metal contact between the gun/valve