Cutting Height Adjustment - Murray EC370 Assembly And Owner's Manual

OPERATING INSTRUCTIONS

Cutting Height Adjustment

NOTE: Refer to figure 11.
NOTE:
different models.
Before using the mower for the first time, raise the cutting position to the height best
suited for your lawn.
To adjust the blade height:
• To ADJUST the blade height, grasp the height adjustment lever and pull it outwards (1).
• To LOWER OR RAISE, move the lever forward / backward (2) and release. Before
operating, make sure that the lever is properly locked at its position when released.
Lever
11
The location and appearance of the height adjustment lever may vary between
WARNING
Do not adjust the height while the
mower is running.
Fig. 11