Before Taking A Measurement - Omron SC-150 Instruction Manual

2. BEFORE TAKING A MEASUREMENT

2.1 Installing Batteries
1. Open the battery cover on the back of the scale.
2. Install the batteries following the correct polarities
as shown to the right and inside the battery
compartment.
3. Close the battery cover.
Note:
• When the "
stored in memory will be saved even if the batteries are removed.
• Place the scale on a hard, flat and level floor immediately after installing the batteries.
The scale is calibrated automatically.
• Disposal of used batteries should be carried out in accordance with your local regulations
for the disposal of batteries.
" symbol and "A1" appear, replace all 4 batteries with new ones. Items
9