Table of Contents Introduction ....................2 Important Safety Information .............. 3 Know Your Device ..................5 Before Taking a Measurement ............... 7 Taking a Measurement ................9 Transferring Your Reading ..............10 Tracking multiple users’ weight progress ........... 11 Restoring to the Default Settings ............12 Error Messages and Troubleshooting ..........
OMRON retail outlet or distributor before attempting to use this product. For specific information about your own weight, consult with your physician. Intended Use The OMRON Connected Scale HN300T2 Intelli IT is intended to measure and display body weight. It is intended for home use only. Receiving and Inspection Remove this product and other components from the packaging and inspect for damage.
Important Safety Information Read the Important Safety Information in this instruction manual before using this device. Follow this instruction manual thoroughly for your safety. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious Warning injury.
Page 5
Important Safety Information • ONLY use 4 “AAA” manganese or alkaline batteries with the scale. DO NOT use other types of batteries. DO NOT use new and used batteries together. Replace all 4 batteries at the same time. • DO NOT use different types of batteries together. •...
Know Your Device Package Contents Scale 4 “AAA” manganese batteries Instruction manual App instruction sheet (How to track multiple users’ weight progress?) Limited warranty sheet Product Overview Main Unit: Front Back Bluetooth button Display SET button Battery cover Plate...
Page 7
Know Your Device Display: A Battery symbol (low/depleted) C Weight metric symbol D OK symbol B Connection E SYNC symbol symbol Display Symbols Flashes when batteries are low. Appears when batteries are depleted. Flashes/appears when the scale is being connected to your smart device or readings are being transferred, or when restoring the scale to the default settings.
Before Taking a Measurement 1. Installing Batteries Open the battery cover on the back of the scale. Install the batteries following the correct polarities as shown to the right and inside the battery compartment. Close the battery cover. Note • Place the scale on a hard, flat and level floor immediately after installing the batteries. The scale is calibrated automatically.
Page 9
• When the “Err” appears, follow the instructions in the app. • The scale will automatically turn off after 10 seconds. • Be aware that OMRON will not be responsible for the loss of data and/or information in the app. • This scale can store up to 2 pairing information.
Taking a Measurement It is recommended to measure your weight at the same time each day for consistency. Place the scale on a hard, flat and level floor. Note • Do not place the scale on a cushioned surface such as a carpet or a mat. Step onto the scale when it is turned off and take a measurement.
Transferring Your Reading Open the app on your smart device. 1. Transferring Automatically Your reading will be transferred to your smart device automatically within 30 minutes after the scale is turned off. Note • If your reading is transferred before the scale is turned off, the “ ”...
2 users can track their weight data on different smart devices. Download and install OMRON connect to your smart device. Refer to “3. Pairing the Scale with a Smart Device”.
Restoring to the Default Settings To restore the scale to the default settings, follow the instructions below. This operation will delete all readings and the pairing information stored in memory. Make sure that the scale is turned off. Press the [Bluetooth] button for 2 sec+ more than 2 seconds.
Solution The scale cannot connect to a Follow the instructions shown in the app. If the “Err” still smart device or transfer data appears after checking the app, contact your OMRON retail appears correctly. outlet or distributor. You moved during a Step off of the scale and it will automatically turn off after 10 measurement.
Maintenance Maintenance To protect your scale from damage, follow the directions below: • Use a soft dry cloth, or a soft cloth moistened with mild (neutral) detergent to clean the scale. • Use a soft cloth moistened with rubbing alcohol to clean the plate. •...
Specifications Product description Connected Scale Model (code) HN300T2 Intelli IT (HN-300T2-EBK / HN-300T2-EGY) Display 5 to 150 kg with an increment of 0.1 kg (11 to 330 lb with an increment of 0.2 lb) (0 st 11 lb to 23 st 8 lb with an increment of 0.2 lb) Weight accuracy 5 to 150 kg ±(1%+0.1 kg)
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by OMRON HEALTHCARE Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.