Torque Converter Cleaning And Lubrication - Coleman POWERSPORTS RTK200 Owner's Manual

Torque Converter
Cleaning and lubrication
To help ensure maximum life out
of the Torque Converter. It is
important to clean and lubricate
the front drive of the Torque
Converter after every 10 hours of
operation. To Clean and lubricate,
follow the instructionsbelow.
1.Make sure engine is not
running and that the engine and
Torque Converter has had time to cool.
2.Remove Torque Converter
cover (1).
3.Remove front drive(2)and take
apart.
4.Clean front drive by spaying with
a carburetor or brake cleaner and
wiping dry with a rag. Using a
graphite type dry lubricant,
sparingly lubricate inner
components.
5.RE-INSTALL THE TORQUE
CONVERTER COVER BEFORE
STARING OR OPERATING THE GO-
KART.
WARNING
!
Performing maintenance and
inspection on the Torque
Converter while the engine is
running could be hazardous.
Performing maintenance and
inspection on the Torque
Converter while the engine is
running could result in getting
body parts or clothing caught in
moving parts,or could result in
touching hot items which could
result in severe injury
MAINTENANCE
!
Operating the Go-Kart without the
Torque Converter cover in place
could be Hazardous.
Operating the Go-Kart without the
Torque converter cover could
result in getting body parts or
loose clothing caught in moving
parts which could result in severe
injury.
Never Start or operate the Go-Kart
without the Torque Converter
cover in place
28
1
WARNING