Starting The Engine - Coleman POWERSPORTS RTK200 Owner's Manual

Table of Contents

Advertisement

OPERATING THE GO KART
STARTING ENGINE
To start the engine
1. Set the parking brake by depressing the
brake pedal and setting the Parking brake
lever(1).
2.Place the fuel valve (2) in the
"ON" (right) position.
3. If engine is cold, place thechoke
lever (3) in the "ON" (left)position.
4.Place the ON/OFF switch (4),
located on the Steering column, in
the "ON" position.
5.Pull the starter recoil cord (5)to
start the engine.
6.Once engine has warmed up for a
few minutes, place the choke lever
(3) back to the "OFF" (right)
position.
WARNING
!
Starting or running the Go Kart in
an enclosed area such as a garage
or shed where there is no
ventilation is hazardous.
Inhaling exhaust fumes from the Go
Kart can cause severe injury or
death.
Never start or run the Go Kart in an
inclosed environment where there is
no ventilation. Always start and run
outdoors.
1
3
5
15
4
2

Advertisement

Table of Contents
loading

Table of Contents