CONNECTING TO THE MAINS POWER SUPPLY
Before connecting, check that the nominal voltage of the
appliance, that is, the voltage stated on the rating plate,
corresponds to the available supply voltage. The rating plate is
located on the lower casing of the hob.
Shut o power to circuit before connecting wires
WARNING
tocircuit.
The heating element voltage is AC 230 V. The appliance also
works perfectly on networks with AC 220 V or AC 240 V.
The hob is to be connected to the mains using a device that
allows the appliance to be disconnected from the mains at all
poles with a contact opening width of at least 3 mm, e.g.
automatic line protecting cut-out, earth leakage trips or fuse.
The cable connections must be made in accordance
WARNING
with regulations and the terminal screws tightened
securely.
Once the hob is connected to the mains supply, check that
WARNING
all cooking zones are ready for use by briefly switching each
on in turn at the maximum setting with suit able cookware.
When the hob is powered on for the first time, all indicators
light up and the child safety lock is activated.
Pay attention (conformity) to phase and neutral allocation of
house connection and appliance (connection schemes);
WARNING
otherwise, components can be damaged.
Warranty does not cover damage resulting from improper
installation.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
WARNING
order to avoid a hazard.
English - 13