Turning Power On And Off; Initial System Start-Up - Alpine MDA-W890 Owner's Manual

1
1
1
1
16
INTLZ
PWR
Basic Operation

Initial System Start-Up

Immediately after installing or applying power to
the unit, it should be initialized. At the upper-left
corner of the front panel is a small button. Using
a pencil or other pointed object, press this reset
button to complete the initialization procedure.

Turning Power On and Off

Press the PWR button to turn on the unit.
Note: The unit can be turned on by pressing
any other button except the eject ( h ),
O/C and CLK buttons.
The volume level gradually increases to the
previous level you were listening to before the
unit was turned off.
Press the PWR button again to turn off the unit.
English