Midi Program Change; Selecting Midi Program Change; Midi Echo - Alesis MIXING CONSOLES Reference Manual

Pressing the button a second time accesses the MIDI Program
MIDI
Change page which allows the MIDIVERB III to change programs
remotely by a MIDI Program Change command. The MIDIVERB III will
also send Program Change commands when programs are selected
from the front panel. When used in conjunction with the
button, the MIDIVERB III transposes the program numbers of a MIDI
controller (a synthesizer, for instance) to match those of the MIDIVERB
III .

SELECTING MIDI PROGRAM CHANGE

1) When in the EDIT mode ( either EDIT LED lit), press the
button TWO times. The numeric display will read "Pon" if MIDI
Program Change is on, and "Pof" if MIDI Program Change is
off.
2) Press the
"On"; Press the
Change "Off".
Pressing the button a third time accesses the MIDI Echo page which
MIDI
allows any MIDI information received by the MIDIVERB III (with the
"Up" button to toggle MIDI Program Change
VALUE
"Down"button to toggle MIDI Program
VALUE
VERB PROGRAM
Pof
Pon
47
USING MIDIVERB III
MIDI PROGRAM
CHANGE
MIDI

MIDI ECHO