Related Manuals for Alesis MULTIMIX 8 USB FX
Summary of Contents for Alesis MULTIMIX 8 USB FX
- Page 1 QUICKSTART GUIDE...
-
Page 2: Connection Diagram
USB cable passive pickup, engage the switch. Power adapter To reduce electrical hum at high gain settings, keep the MULTIMIX 8 USB FX's Software DVD power supply away from your guitar cable and the MULTIMIX 8 USB FX's Quickstart Guide channel inputs. -
Page 3: Audio Setup
MULTIMIX 8 USB FX first, then plug the power supply into a power outlet. POWER SWITCH – Turns the MULTIMIX 8 USB FX on and off. Turn on the MULTIMIX 8 USB FX after all input devices have been connected and before you turn on amplifiers. -
Page 4: Top Panel Features
FOOTSWITCH – When a footswitch is connected to this jack with a 1/4" TRS cable, it can be pressed to allow all channels to bypass MULTIMIX 8 USB FX's internal effects processor. This jack supports Boss FS-5L and FS-6 pedals or other latching-type footswitches (not included). - Page 5 FX POST SEND – Adjusts the channel audio (post-EQ) level that is sent to MULTIMIX 8 USB FX's internal effects processor. Turn this up for the channels that you want internal effects applied to.
-
Page 6: Technical Specifications
TECHNICAL SPECIFICATIONS INPUT CHANNELS MIC INPUT Sensitivity Range: -69dBu to -19dBu nominal, +18dBu maximum LINE INPUT Sensitivity Range: -49dBu to -+1dBu nominal, +18dBu maximum MIC INPUT / LINE INPUT Gain Range: -∞ to +20dB EQUALIZATION HI : 12kHz, ±15dB MID: 120Hz – 4KHz, ±15dB LO: 80Hz, ±15dB AUX SENDS AUX SEND Gain Range: -∞... -
Page 7: Block Diagram
BLOCK DIAGRAM CHANNELS 1-2 PHANTOM POWER INT EFX TRIM AUX SEND PHONES LEVEL LEVEL HIGH INSERT PHONES 75 Hz Variable FREQ CLIP CHANNELS 3-4 MONITOR LEVEL PHANTOM POWER TRIM INT EFX MIX TO MONITOR LEVEL HIGH 75 Hz MONITOR OUT 2-TRK to 1/4"...