Interfacing Midiverb Iii; Mono Operation - Alesis MIXING CONSOLES Reference Manual

SECTION 3
The Alesis MIDIVERB III has high impedance inputs that are ideally
suited for use either with instruments or line level signals. Although
microphones can be connected directly into the MIDIVERB III, it is
recommended that for quietest operation they be connected to a mixing
console first and then connected to the MIDIVERB III as described in
Figures 2 or 3.
For mono operation of the MIDIVERB III, use only the Right Input. This
will result in a stereo output. If a mono output is required, only the Right
Output should be used. See Figures 1A and 1B
FIGURE 1A/1B
MONO CONNECTION TO INSTRUMENT OR MICROPHONE
A. MONO IN - MONO OUT
INSTRUMENT OR MICROPHONE
RIGHT INPUT
B. MONO IN - STEREO OUT
INSTRUMENT OR MICROPHONE
RIGHT INPUT

INTERFACING MIDIVERB III

TO AMPLIFIER OR MIXING CONSOLE
RIGHT OUTPUT
TO AMPLIFIER OR MIXING CONSOLE
RIGHT OUTPUT LEFT OUTPUT
17
INTERFACING MIDIVERB III
INSTRUMENTS
MICROPHONES

MONO OPERATION