Filter Cleaning - Mitsubishi Electric MSZ-WG20VA-H1 Operating And Installing Instructions

Filter Cleaning

Filter Cleaning (Cleaning is done once two weeks)
1
Pull out t�e filter slig�tly.
Filter
Remove
Note
During disassembly of t�e filter, take care not to touc� t�e
metallic part of the indoor unit, as you may be scratched.
2
Use a cleaner to clean or use water to wash.
• Don't clean t�e filter wit� brus� or �ard sponge,
ot�erwise, t�e filter will be distorted.
• If t�e filter is too dirty, use warm solution mixed wit�
neutral detergent to wash the deodorizing filter.
• Don't use hot water (about over 50℃) to wash the
filter to avoid distortion.
After was�ing wit� water, t�e filter can't be used
3
until it is dried.
·Don't dry t�e filter under suns�ine or wit� fire.
Open the front
panel, Remove/
replace t�e filter
4
Installing t�e filter.
14
Installation