Setup And Installation Steps; General Safety Guidelines; Powering Down The Mobile Rack - Supero CSE-M14TQC User Manual

CSE-M14TQC MOBILE RACK User's Guide
4-4

Setup and Installation Steps

Use the following list as a guide to set up and install the mobile rack. If this mobile
rack is to be installed in a chassis, use the instructions in the chassis manual.
Mobile Rack Chassis Installation
1. Unpack and examine system parts.
2. Review all system and safety guidelines.
3. CSE-M14TQC: Install the cooling fan as described in section 4-7 of this
manual.
4. Install the hard drives.
5. Connect the data cables and power cord.
4-5

General Safety Guidelines

•
Always disconnect power cables before installing or removing any components
from the computer, including the backplane.
•
Disconnect the power cable before installing or removing any cables from the
mobile rack or backplane.
•
Make sure that the backplane is securely and properly installed on the
motherboard to prevent damage to the system due to power shortage.
4-6

Powering Down the Mobile Rack

Powering Down the Mobile Rack
1. Power down the system which is providing power to the mobile rack using the
operating system and following the on-screen prompts.
2. Unplug all power cords from the rear of the power supply.
3. Disconnect all necessary cables and label the cables for easy identification.
4. Use a grounded wrist strap designed to prevent static discharge when
handling components.
5. Save all screws and fasteners for later use.
6. Familiarize yourself with the instructions in the following sections before
configuring the mobile rack.
4-2