Table of Contents
Advertisement
M28E1 and E2 Mobile Rack User's Guide
4-4
Setup and Installation Steps
Use the following list as a guide to setup and install the mobile rack. If this mobile
rack is to be installed in a chassis, use the instructions in the chassis manual.
Mobile Rack Chassis Installation
1.
Unpack and examine system parts.
2.
Review all system and safety guidelines.
3.
Install the system fan.
4.
Install the hard drives.
5.
Connect data and power cables.
4-5
General Safety Guidelines
•
Always disconnect power cables before installing or removing any components
from the computer, including the backplane.
•
Disconnect the power cable before installing or removing any cables from the
mobile rack or backplane.
•
Make sure that the backplane is securely and properly installed on the mother-
board to prevent damage to the system due to power shortage.
4-6
Before Accessing the Mobile Rack
Prior to Accessing the Mobile Rack
1.
Power down and power supply connected to the chassis or server. In addi-
tion, unplug all power cords from the wall outlet.
2.
Disconnect all necessary cables and label the cables for easy identifi cation.
3.
Use a grounded wrist strap designed to prevent static discharge when han-
dling components.
4.
Save all screws and fasteners for later use.
5.
Familiarize yourself with and follow the instructions in this section.
4-2
Advertisement
Table of Contents
