Table of Contents
Advertisement
Mobile Rack Installation Procedures
4-1
Tools Required
The following tools are required to install the mobile rack into the chassis:
•
Phillips head screwdriver
•
Antistatic strap (recommended)
4-2
Important Safety Guidelines
This product should be assembled and/or serviced by qualifi ed and experienced
technicians. To avoid personal injury and property damage, carefully follow the
guidelines listed below.
Safety Guidelines
1.
Turn off all peripheral devices and the power supply connected to the chassis.
2.
Disconnect the chassis from any power source.
3.
When disconnecting cables, label them for easy identifi cation.
4.
Use a grounded wrist strap designed to prevent static discharge when han-
dling components.
5.
Save all the screws and fasteners for later use and label them for easy iden-
tifi cation.)
6.
Follow the installation procedures in the following section of this manual to
remove and install the hard drives, cooling fan, and the back panel of the
mobile rack.
Safety Information and Technical Specifi cations
Chapter 4
4-1
Advertisement
Table of Contents
