Table of Contents
Advertisement
4-7
Cooling Fan Installation
Installing the Cooling Fan
The CSE-M14TQC mobile rack includes a cooling fan. When using the CSE-
M14TQC without installing the mobile rack in a larger unit such as a chassis, a
cooling fan must be installed on the mobile rack unit.
For more information on installing the mobile rack into a chassis or server, see
the documentation for your mobile rack or server. You can also visit our website at
http://www.supermicro.com.
Installing the Cooling Fan on the Mobile Rack
1. Power down the system supporting the mobile rack as described in Section
4-6.
2. Align the mounting holes on the fan with the mounting holes in the mobile
rack.
3. Attach the cooling fan cable to the fan connector.
4. Secure with two screws as illustrated.
Fan Removal
Removing the Cooling Fan from the Mobile Rack
1. Power down the system supporting the mobile rack as described in Section
4-6. Remove the fan cable from the mobile rack by gently pulling the cable
from the backplane.
2. Remove the screws securing the fan to the mobile rack.
3. Pull the fan away from the rear of the mobile rack.
Chapter 4 Mobile Rack Installation Instructions
4-3
Advertisement
Table of Contents
