Advertisement
S
UPER CSE-M34S/CSE-M34T User's Guide
4. Hardware Installation Procedures
(*Note: For the CSE-M34S: 1. SCSI IDs are assigned automatically by the
backplane. Do not set IDs manually on the drives. See the previous section
for SCSI ID jumper settings. 2. SCSI termination is enabled by default on the
SCSI backplane.)
A. Accessing Hot Swappable Drives:
1.Push the release button and pull up the handle to release the
drive tray as shown below on the left:
2. Pull out drive trays as shown below on the right:
Pull up the
handle
Push the release button
3. Mount a drive in a carrier and secure it with screws as shown
below:
Mount a drive
into a carrier
6
Pull up the
drive trays
Secure the drive
with screws
Advertisement
