Introduction; General Information; Tools - Acer AS8950G Service Manual

Machine Maintenance Procedures

Introduction

This chapter contains general information about the computer, a list of tools needed to
perform the required maintenance and step by step procedures on how to remove and install
components from the computer.

General Information

The product previews seen in the following procedures may not represent the final product
color or configuration. Cable paths and positioning may also differ from the actual model.
During the removal and installation of components, make sure all available cable channels
and clips are used and that the cables are installed in the same position.
All prerequisites must be performed prior to performing maintenance.

Tools

The following tools are required to perform the following maintenance procedures:
Wrist grounding strap and conductive mat
Flat screwdriver
Philips screwdriver
Machine Maintenance Procedures
0
0
0
3-5