Dimm (Dual In-Line Memory Module) Module Removal; Dimm Module Installation - Acer AS8950G Service Manual

DIMM (Dual In-line Memory Module) Module Removal

Prerequisite:
Base Door Removal
1. Locate module (C) on lower cover. Refer to
2. Push module clips (A) outwards as shown in
3. Pull module out of mainboard connector (B).
4. Repeat steps 2 and 3 for remaining modules.
Figure 3-8. DIMM Modules

DIMM Module Installation

1. Install module into mainboard connector (B). Refer to
2. Push down on module until module clips (A) lock in place.
3. Repeat steps 2 and 3 for remaining modules.
4. Install base door.
3-14
Figure 3-6.
Figure 3-8.
A
A
Figure
Machine Maintenance Procedures
A
A
B
C
3-8.
0
0