Fingerprint Module Removal; Finger Print Module Installation - Acer AS8950G Service Manual

Fingerprint Module Removal

Prerequisite:
Upper Cover Removal
1. Locate fingerprint module (E) on upper cover. Refer to
2. Disconnect module FFC (A) from module connector (B) as shown in
3. Remove module FFC (A) from upper cover.
4. Remove screw (C) (M2.0*3.0-I) from upper cover.
5. Remove module bracket (D) from upper cover.
6. Remove module from upper cover.
Figure 3-30. Fingerprint Module

Finger Print Module Installation

1. Install module on upper cover.
2. Install module bracket (D) and align with screw hole. Refer to
3. Install and secure screw (C) (M2.0*3.0-I) to upper cover.
4. Install module FFC (A) on upper cover.
5. Connect module FFC (A) to module connector (B).
6. Install upper cover.
3-34
D
D
B
B
C
Figure 3-25.
Figure
A
A
Figure 3-30.
Machine Maintenance Procedures
0
3-30.
0