Printing Maintenance - Canon S900 Quick Start Manual

To print a nozzle check pattern in Windows:
1.
Make sure the printer is on and paper is loaded.
2.
Click Start, then Settings, then Printers.
For Windows XP, click Start, then Control Panel, then Printers and
Other Hardware, then Printers and Faxes. The Maintenance tab
may vary for Windows 2000 and Windows XP.
3.
Right-click the Canon S900 printer
icon, then click Properties.
4.
Click the Maintenance tab, then click
the Nozzle Check button.
5.
Click OK to start the nozzle test. The
nozzle test pattern will print.
6.
When printing is complete, click OK.
7.
Examine the printed nozzle check
pattern to verify that the ink is
consistent on the printout.
If indicated by the printout, clean the printhead (see "Cleaning
the Printhead" on page 26), or realign it (see "Aligning the
Printhead" on page 23).
To print a nozzle check pattern in Mac OS:
1.
Make sure the printer is on and paper is loaded.
2.
From an application File menu, click
Page Setup.
3.
Click Utilities. The Canon S900 Printer
Utility window will appear.
4.
Select Test Print from the drop-down
menu.
5.
Click the Nozzle Check button. When
prompted, click OK. The nozzle test
pattern will print.
6.
When done, click Close.

Printing Maintenance

25