Download Print this page
Canon BJC-S9000 Setup Instructions
Canon BJC-S9000 Setup Instructions

Canon BJC-S9000 Setup Instructions

Canon bjc-s9000: setup instruction
Hide thumbs Also See for BJC-S9000:

Advertisement

Quick Links

1
Unpack the Printer
1
Carefully remove all items from the box.
S9000
Photo Printer
Paper Rest
Documentation
and Software Kit
Power Cord
S9000 Print Head
Ink Tanks
BCI-6C Cyan
BCI-6M Magenta
BCI-6BK Black
BCI-6Y Yellow
BCI-6PC Photo Cyan
BCI-6PM Photo Magenta
2
Prepare the Printer
1
Remove the shipping tape from the
front and sides of the printer.
Shipping Tape
2
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
3
Press the POWER button.
POWER
POWER
Button
Lamp
4
Open the front cover. The print head holder
automatically moves to the center. Remove
the protective tape.
Protective tape
Serial number
Write down the serial number located to
the right of the print head. You will need
this later to register the product.

Start Here

Easy Setup Instructions
3
Install the Print Head
1
Remove the print head from its package.
2
Turn the print head over, then remove
the orange protective cap.
NOTE: Do not touch the electrical contacts.
Electrical contacts
3
Raise the gray lock lever.
4
Gently slide the print head into the holder.
The print head will rest at a slight angle.
Do not press it down.
Lower the lock lever and gently press
5
it down until it locks into place.
4
Install the Ink Tanks
1
Pull the orange tab off the yellow ink tank
(BCI-6Y), then remove and discard the
plastic wrapper.
2
Twist off and discard the orange
protective cap.
Protective cap
NOTE: To avoid spilling ink, never press on
the sides of an ink tank.
3
Insert the ink tank into the correct slot.
(Refer to the color guide on the print head.)
Press down gently until the ink tank locks
into place.
4
Insert the remaining five ink tanks into
their assigned slots.
5
Close the front cover, attach the paper rest
and extend the paper output tray.
S9000
Photo Printer
5
Connect the Printer
To Your Computer
1
Turn the printer off.
IMPORTANT: Be sure the printer is
off before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
2
Connect one end of the USB cable
to the computer, the other to the printer.
USB Port
USB Cable
Continue with Step 6
on side two.

Advertisement

loading

Summary of Contents for Canon BJC-S9000

  • Page 1: Start Here

    Remove the shipping tape from the front and sides of the printer. S9000 Photo Printer Plug the power cord into the back of the printer and connect the other end to a power outlet. Paper Rest Press the POWER button. POWER...
  • Page 2 Click OK (Windows) or Send (Macintosh) when finished. Part no. QA7-1905-V01 © 2002 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice.

This manual is also suitable for:

S9000