Selecting A Radio Channel; Adjusting The Squelch; Adding A Custom Radio Preset; Selecting A Roger Tone - Garmin TREAD Owner's Manual

Selecting a Radio Channel

1 From the main menu, select Radio.
2 Select an option:
• To move to a different channel, select
• To select a MURS channel from the menu, select Channel.

Adjusting the Squelch

You can adjust the squelch and change between CTCSS, DCS and Open squelch modes to improve audio quality
and avoid radio interference in your area.
1 From the main menu, select Radio.
2 Select an option:
• To choose a squelch code within the current mode, select
• To adjust the squelch mode, select Open.

Adding a Custom Radio Preset

1 Select Radio > Preset >
2 Select or to select a channel and squelch code.
3 Select Save.

Selecting a Roger Tone

You can select the tone other devices play when you operate your radio.
1 Select Radio > > Roger Tone.
2 Select a roger tone.
The device plays the selected tone.
3 Select Save.

Turning the Radio Off

Select Radio > > Yes.

Enabling Push-to-Talk with a Headset

You can enable push-to-talk controls for use with a compatible Bluetooth headset. This allows you to transmit
your voice using the voice dial feature on your headset.
1 Select Radio > > Push to Talk with Headset.
2 If necessary, follow the on-screen instructions to pair your headset with the device.
3 Select Push to Talk with Headset.
4 Select .
16
or .
.
or .
Off-Road Navigation Features