International Calls; Pause Dialing; Wait Dialing - Samsung Dart SGH-T499 User Manual

•
Add wait to insert a hard pause within the number
string (the phone waits for your input). A wait requires
that any consecutive numbers be manually sent by
tapping Send.

International Calls

From the Home screen, tap
1.
0
and hold
Use the on-screen keypad to enter the
2.
country code, area code, and phone number.
• If you make a mistake, tap
single digit.
• Touch and hold
Tap .
3.

Pause Dialing

You can dial or save phone numbers with pauses for
use with automated systems, such as voicemail or
financial phone numbers.
•
3 Second Pause automatically sends the next set of
numbers after a three-second pause. This is indicated
in the number string as a colon (;).
•
Wait sends the next set of numbers only after tapping
. This is indicated in the number string as a
Send
semicolon (;).
From the Home screen, tap
1.
on-screen keypad to enter the phone number.
Press and then tap
2.
feature adds an automatic three-second
pause.
, then touch
. The + symbol displays.
once to delete a
to delete all digits.
and use the
Add 3 sec pause
Use the keypad to enter the additional
3.
numbers that will be dialed automatically
after the second pause.
Tip: You can create pauses longer than two seconds
by entering multiple 2-sec pauses.
Tap
4.

Wait Dialing

Inserting a Wait into your dialing sequence means
that the phone waits until it hears a dial tone before
proceeding with the next sequence of numbers.
From the Home screen, tap
1.
on-screen keypad to enter the phone number.
Press
2.
feature causes the phone to require your
acceptance before sending the next set of
entered digits.
Tap
3.
Once prompted, tap
4.
remaining digits.
Redialing the Last Number
The phone stores the numbers of the calls you've
dialed, received, or missed if the caller is identified.
To recall any of these numbers:
From the Home screen, tap
1.
. This
Tap the
2.
calls.
Call Functions and Contacts List
.
and then tap
Add wait
.
to dial the
Send
tab to display the list of recent
Call log
and use the
. This
.
41