Radio Frequency (Rf) Energy - Samsung Galaxy Tab SPH-P100 User Manual

Sprint
Hide thumbs Also See for Galaxy Tab SPH-P100:
Table of Contents

Advertisement

help you fulfill any warranty obligations and allow you to enjoy
this product for many years:
Keep your Samsung Device away from:
Liquids of any kind
Keep the device dry. Precipitation, humidity, and liquids contain
minerals that will corrode electronic circuits. If the device does
get wet, do not accelerate drying with the use of an oven,
microwave, or dryer, as this may damage the device and could
cause a fire or explosion. Do not use the device with a wet
hand. Doing so may cause an electric shock to you or damage
to the device.
Extreme heat or cold
Avoid temperatures below 0°C / 32°F or above 45°C / 113°F.
Microwaves
Do not try to dry your device in a microwave oven. Doing so
may cause a fire or explosion.
Dust and dirt
Do not expose your device to dust, dirt, or sand.
Cleaning solutions
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
Shock or vibration
Do not drop, knock, or shake the device. Rough handling can
break internal circuit boards.
190
4A. Important Safety Information
Paint
Do not paint the device. Paint can clog the device's moving
parts or ventilation openings and prevent proper operation.

Radio Frequency (RF) Energy

Knowing Radio Frequency Safety
The design of your device complies with updated NCRP
standards described below.
In 1991–92, the Institute of Electrical and Electronics Engineers
(IEEE) and the American National Standards Institute (ANSI)
joined in updating ANSI's 1982 standard for safety levels with
respect to human exposure to RF signals. More than 120
scientists, engineers and physicians from universities,
government health agencies and industries developed this
updated standard after reviewing the available body of
research. In 1993, the Federal Communications Commission
(FCC) adopted this updated standard in a regulation. In August
1996, the FCC adopted hybrid standard consisting of the
existing ANSI/IEEE standard and the guidelines published by
the National Council of Radiation Protection and
Measurements (NCRP).
Body-Worn Operation
To maintain compliance with FCC RF exposure guidelines, if
you wear a handset on your body, use a Sprint-supplied or
Sprint-approved carrying case, holster or other body-worn
accessory. If you do not use a body-worn accessory, ensure

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents