Samsung Galaxy Tab SPH-P100 User Manual page 157

2.
Enter the Network SSID. This is the name of your
Wi-Fi network.
3.
Tap the Security field and select a security option.
This must match the current security setting on
your target network.
4.
If secured, you will also need to enter the wireless
password. The show password
password as you type it instead of showing only
asterisks (****).
5.
Tap Save to store the new information and connect
to the Wi-Fi network.
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the wireless password again, unless
you reset your device back to its factory default settings.
To manually scan for a Wi-Fi network:
1.
Press >
Wireless and network > Wi-Fi settings.
2.
Press and tap
option reveals the
and tap >
.
Scan
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status
at a glance:
– Wi-Fi is connected and active.
– Wi-Fi active but there is a communication
issue with the target Wireless Access Point
(WAP).
Using the Advanced Wi-Fi Settings Menu
From the advance Wi-Fi settings menu, press
and tap menu allows you to set up many of
Advanced
your device's Wi-Fi services, including:
Setting your Wi-Fi sleep policy
Viewing your device's MAC Address
Configuring use of either a DHCP or Static IP
To access the advanced Wi-Fi settings menu:
1.
Press
>
Wireless and network > Wi-Fi settings
2. Press and tap
3B. Web and Data Services
and tap
>
.
.
Advanced
145