Pairing Bluetooth Devices - Samsung Galaxy Tab SPH-P100 User Manual

To change your Bluetooth name:
1.
Make sure Bluetooth is turned on.
2.
From the Bluetooth settings page, tap
3.
Enter a new name.
4.
Tap to complete the process.
OK
To make your device visible:
1.
Make sure Bluetooth is turned on.
2.
From the Bluetooth settings page, tap
Making your device visible allows it to be
detected by other devices for pairing and
communication.
Note:
Your device is visible for up to 120 seconds
(two minutes). This value appears as a countdown
within this field.
To scan for Bluetooth devices:
1. Make sure Bluetooth is turned on.
2.
From the Bluetooth settings page, tap
to search for visible external Bluetooth-
devices
compatible devices such as headsets, printers,
and computers.
122 2H. Bluetooth

Pairing Bluetooth Devices

Paired Devices
.
Device name
The Bluetooth pairing process allows you to establish
trusted connections between your device and another
Bluetooth device. When you pair devices, they share a
passkey, allowing for fast, secure connections while
bypassing the discovery and authentication process.
To pair your device with another Bluetooth device:
Discoverable .
1. Verify your Bluetooth is active.
2.
From the Bluetooth settings page, tap
Your device must be visible to successfully pair
with an external device.
Note:
3.
Tap
Scan for
of discovered in-range Bluetooth devices.)
4.
Tap a device from the list to initiate pairing.
5.
Enter the passkey (PIN) and tap
Your device remains visible/discoverable for only 120
seconds. If your device has not completed connection
to an external device in that time, you must restart the
timer.
Scan for devices . (Your device will display a list
.
Discoverable
OK .