Confirmation Of Firmware Version - Panasonic Lumix DMC-LS1PP Service Manual

9 CONFIRMATION OF FIRMWARE VERSION

The Firmware version can be confirmed by ordering the following steps:.
· Step 1. The temporary cancellation of factory setting:
Set the mode dial to " Normal Picture (Red camera mark)".
While keep pressing Optical Image Stabilizer and " UP of Cross key" simultaneously. turn the power on with inserting the
SD memory card which has a few photo data.
· Step 2. Confirm the version:
Set the mode dial to " Playback " and then press [DISPLAY] to switch to LCD with indication. (Fig. A)
Press Optical Image Stabilizer and " DOWN
(The version information is displayed on the LCD with green colour letters.) (Fig. B)
CAUTION:
The version information does not display if the LCD has switched to LCD with indication already.
In this case, press DISPLAY to switch to LCD with indication.
Point:
· The firmware version and EEPROM version can be confirmed with the information (1).
· The information (2), (3) are just reference.
DMC-LS1PP / DMC-LS1PL / DMC-LS1EB / DMC-LS1EG / DMC-LS1EGM / DMC-LS1GC / DMC-LS1GK / DMC-LS1GN / DMC-LS1GT / DMC-LS1SG
of Cross key" simultaneously. (No need to keep pressing.)
19