Panasonic Lumix DMC-LS1PP Service Manual page 5

1.4.2. INITIAL SETTINGS:
When you replace the Main C.B.A., be sure to perform the initial settings after achieving the Adjustment, by ordering the following
procedure in accordance with model suffix.
· Step 1. The temporary cancellation of factory setting:
Set the mode dial to " Normal Picture (Red camera mark)".
While keep pressing Optical Image Stabilizer and " UP of Cross key" simultaneously, turn the Power on.
· Step 2. The cancellation of factory setting:
Set the mode dial to " Playback ".
While keep pressing Optical Image Stabilizer and " UP of Cross key" simultaneously, turn the Power off.
· Step 3. Turn the Power on:
Set the mode dial to " Normal Picture (Red camera mark)", and then turn the Power on.
· Step 4. Display the INITIAL SETTING:
While keep pressing MENU and " RIGHT of Cross key" simultaneously, turn the Power off.
· Step 5. Set the INITIAL SETTING:
Select the area with pressing " UP / DOWN
The only set area is displayed, and then press the " RIGHT
automatically.)
Confirm the display of "PLEASE SET THE CLOCK" in English when the unit is turned on again.
(For China and Taiwan market, the display shows "PLEASE SET THE CLOCK" in Chinese.)
· NOTE:
The display shows "SET THE CLOCK" when turn the Power on again.
Connect the unit to PC with USB cable and is detected as removable media.
1) As for your reference Default setting condition is given in the following table.
· Default setting (After "INITIAL SETTINGS")
MODEL
a) DMC-LS1S
b) DMC-LS1PP/PL
c) DMC-LS1EB/EG/EGM/GC/GN/SG
d) DMC-LS1GK
e) DMC-LS1GT
DMC-LS1PP / DMC-LS1PL / DMC-LS1EB / DMC-LS1EG / DMC-LS1EGM / DMC-LS1GC / DMC-LS1GK / DMC-LS1GN / DMC-LS1GT / DMC-LS1SG
of Cross key", and then press the " RIGHT of Cross key".
VIDEO OUTPUT
NTSC
NTSC
PAL
PAL
NTSC
of Cross key" after confirmation. (The unit is powered off
LANGUAGE DATE
Japanese Year/Month/Date
English Month/Date/Year
English Date/Month/Year
Chinese (simplified) Year/Month/Date
Chinese (traditional) Year/Month/Date
5
REMARKS