Advertisement
Verify that the RJ-45 silver satin cable is plugged into the control port on
o
the back of the ADTRAN DSU IQ.
2. If you are able to see the initial login screen but the remote configuration session
fails, the screen shown in Figure 8 will continue to be displayed after pressing a
key on the computer.
------------------------------------------------------------------------------
Any key to continue...
------------------------------------------------------------------------------
______________________________________________________________________________
ENTER SELECTION ->
To return to the Login screen, press Ctrl L twice. This should disconnect the
remote login session and bring up the initial screen of the local unit as shown in
Figure 9.
Figure 7
Figure 7
Figure 7
Figure 7
Figure 8
Figure 8
Figure 8
Figure 8
Advertisement
