Advertisement
______________________________________________________________________________
1 - CONFIGURATION
2 - VIEW STATISTICS
3 - TEST
4 - LOGOUT
______________________________________________________________________________
ENTER SELECTION ->
7. Notice the change in the upper right hand corner from local to remote. You are
now configuring the remote unit.
Troubleshooting the Remote Configuration Process
Troubleshooting the Remote Configuration Process
Troubleshooting the Remote Configuration Process
Troubleshooting the Remote Configuration Process
1. If you are unable to see the initial login screen, there may be a physical
connection problem.
Verify that the correct computer COM port is being used. This may be
o
accomplished by connecting to another device, such as a modem.
Verify the proper ADTRAN RJ45-DB25 adapter is connected. The
o
adapter is labeled with ADTRAN part number 3196.ADPT005.
Verify that the RJ-45 silver satin cable is pinned out with all eight pins
o
straight through the cable. Orient the two RJ-45 connectors with the tab
down and the gold pins pointing away from the user. The same color wire
should be present in each position, left-to-right, on both RJ-45 connectors
as shown in Figure 7.
MAIN MENU
Figure 6
Figure 6
Figure 6
Figure 6
ADTRAN DSUIQ
REMOTE
Advertisement
