Table of Contents
Advertisement
Switching on the burner
Do not turn the control knob clockwise
past the Off position.
When a control knob is activated, a
spark is developed automatically on all
burners. This is normal and does not
indicate a fault.
You may notice a brief re-ignition (1–
2 clicks) when turning on the
appliance, e.g., because of a draft.
Push in the control knob for the
burner required and turn it
counterclockwise to High.
The ignitor "clicks" and ignites the gas.
If the burner fails to ignite, turn the
control knob to the Off position.
Aerate the room or wait at least
1 minute before trying again.
If the burner does not ignite the
second time, turn the control knob
back to Off and see "Frequently
asked questions".
Switching on during a power
failure
If there has been a power failure,
the automatic re-ignition feature will
not work properly.
Operate the cooktop only under
supervision. If the burner has not
ignited or the flame goes out, turn
the control knob to Off.
Using the gas cooktop
Normal and power burners
In case of a power failure, the flame
can be ignited manually.
Push in the control knob and turn it
counterclockwise to High.
Light the emerging gas/air mixture
with a match.
Grill
Danger of injury caused by
manually igniting the burner during a
power failure!
Never operate the grill during a
power failure.
Turn the grill control knob to Off.
Griddle plate
Danger of injury caused by
manually igniting the burner during a
power failure!
Never operate the griddle plate
during a power failure.
Turn the control knob for the griddle
plate to Off.
Adjusting the flame
The burners can be variably adjusted
between the lowest and highest flame
settings.
47
Advertisement
Table of Contents
