HP 8163A User Manual page 47

Figure 1-17
Getting Started
A Sample Session
Connecting the Instrument for the Sample Session
4 Make sure the instrument is powered up.
5 How to set the wavelength for the Power Sensor module:
a Move to the wavelength parameter, [λ], for the Power
Sensor module and press E
b Enter 1540.000 and press E
6 How to set the averaging time for the Power Sensor module:
a Move to the measurement averaging time, [T
press E
b Move to <1 s>, using the cursor key, and press E
7 For the Power Sensor module, make sure that Watts are the
selected Power Unit and that the instrument is in automatic
ranging mode. To change these settings:
a Move to the power parameter, [P], and press the
[Power Unit] softkey.
b Move to <W>, using the cursor key, and press E
c Move to the [R
d Move to <A
47
NTER
NTER
.
NTER
M ] parameter and press E
ANGE ODE
>, using the cursor key, and press E
UTO
.
.
], and
AVG
NTER
.
NTER
NTER
NTER
.
.
.