Table of Contents
Advertisement
N OT E
N OT E
Figure 1-8
Getting Started
A Description of the User Interface
When editing a parameter, see "How to Change the Value of a
Parameter" on page 41, the up and down cursor keys can be used to
increment and decrement the value of a digit and the left and right
cursor keys can be used to move the highlighted digit left and right.
How to Use the Numerical Keypad
The Numerical Keypad is only available if you use the HP 8164A.
You can use the Numerical Keypad to change the value of a
parameter. See "How to Change the Value of a Parameter" on
page 41.
How to Use the Modify Knob
The Modify Knob is only available if you use the HP 8164A.
The Modify Knob
You can use the Modify Knob to navigate around the display. When
you turn the Modify Knob through one click, one action is
performed.
Turning the Modify Knob clockwise moves the highlighted marker
right and then down. Turning the Modify Knob anti-clockwise
moves the highlighted marker left and then up.
You can use the Modify Knob to change the value of a parameter.
See "How to Change the Value of a Parameter" on page 41.
35
Advertisement
Table of Contents
