Toshiba 19DV616DG Service Manual page 40

1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
CAUTION
Be careful not to remove the FFC cable forcibly, because
the FFC cable may be damaged.
1-1: STAND ASS'Y (Refer to Fig. 1-1)
1. Remove the 2 screws (1).
2. Remove the Stand Ass'y in the direction of arrow (A).
3. Unlock the 2 support (2).
4. Remove the Cover LVDS in the direction of arrow (B).
5. Disconnect the following connector: (CP7202).
(2)
Cover LVDS
(B)
(1)
CP7202
1-2: COVER INVERTER (Refer to Fig. 1-2)
1. Remove the screw (1).
2. Remove the Cover Inverter in the direction of arrow.
3. Disconnect the following connectors:
(CP7001, CP7002, CP7003 and CP7004).
4. Remove the 8 screws (2).
5. Remove the 2 screws (3).
Cover Inverter
(2)
(3)
(2)
(3)
(2)
DISASSEMBLY INSTRUCTIONS
Stand Ass'y
FFC Cable
(1)
(A)
Connector
Fig. 1-1
(1)
(2)
(2)
(2)
(2)
(2)
CP7004
CP7003
CP7002
CP7001
Fig. 1-2
1-3: FRONT CABINET ASS'Y and LCD PANEL
(Refer to Fig. 1-3)
1. Turn up set and put the Front Cabinet Ass'y of LCD
on the top.
2. Remove the Front Cabinet Ass'y in the direction of
arrow (A).
3. Remove the LCD Panel in the direction of arrow (B).
Front Cabinet Ass'y
LCD Panel
Back Cabinet Ass'y
B1-4 B1-4
(A)
(B)
Fig. 1-3
22DV616DG 22DV616DG