Step 2: Charging The Battery Pack - Sony Handycam DCR-DVD105E Operating Manual

Step 2: Charging the battery pack

You can charge the battery after attaching the
"InfoLITHIUM" battery pack (P series)
(p.135) to your camcorder.
• You cannot use an NP-FP30 battery pack with
your camcorder. (See the reverse side of the
battery pack for the model number.)
Installing the battery pack with excess force may
lead to camcorder malfunction such as
deterioration in battery pack performance or
difficulty in removing the battery pack.
POWER switch
DC IN jack cover
DC plug
Battery
DC IN jack
Mains lead
To the wall socket
1
Slide the battery pack in the
direction of the arrow until it clicks.
CHG lamp
AC Adaptor
2
Slide the POWER switch in the
direction of the arrow to set it to
OFF (CHG) (The default setting).
3
Connect the AC Adaptor to the DC
IN jack on your camcorder.
Open the DC IN jack cover to connect the
AC Adaptor.
DC IN jack cover
4
Connect the mains lead to the AC
Adaptor and the wall socket.
The CHG (charge) lamp lights up and
charging starts.
Match the v mark
on the DC plug with
v mark on your
camcorder.
19