Table of Contents
Advertisement
Pairing Your Wireless Sensors
The first time you connect a wireless ANT+ or Bluetooth sensor to your Garmin watch, you must pair the watch
and sensor. After they are paired, the watch connects to the sensor automatically when you start an activity and
the sensor is active and within range.
TIP: Some ANT+ sensors pair with your watch automatically when you start an activity with the sensor turned
on and near the watch.
1 Move at least 10 m (33 ft.) away from other wireless sensors.
2 If you are pairing a heart rate monitor, put on the heart rate monitor.
The heart rate monitor does not send or receive data until you put it on.
3 Hold
.
4 Select
> Sensors & Accessories > Add New.
5 Bring the watch within 3 m (10 ft.) of the sensor, and wait while the watch pairs with the sensor.
After the watch connects to the sensor, an icon appears at the top of the screen.
Using an Optional Bike Speed or Cadence Sensor
You can use a compatible bike speed or cadence sensor to send data to your watch.
• Pair the sensor with your watch
• Set your wheel size
(Calibrating Your Speed Sensor, page
• Go for a ride
(Going for a Ride, page
Calibrating Your Speed Sensor
Before you can calibrate your speed sensor, you must pair your watch with a compatible speed sensor
Your Wireless Sensors, page
Manual calibration is optional and can improve accuracy.
1 Hold
.
2 Select
> Sensors & Accessories > Speed/Cadence > Wheel Size.
3 Select an option:
• Select Auto to automatically calculate your wheel size and calibrate your speed sensor.
• Select Manual, and enter your wheel size to manually calibrate your speed sensor
Circumference, page
Club Sensors
Your watch is compatible with Approach
automatically track your golf shots, including location, distance, and club type. See the owner's manual for your
club sensors for more information (garmin.com/manuals/ApproachCT10).
Situational Awareness
Your Venu 2 Plus watch can be used with the Varia smart bike lights and rearview radar to improve situational
awareness. See the owner's manual for your Varia device for more information.
tempe
The tempe is an ANT+ wireless temperature sensor. You can attach the sensor to a secure strap or loop where
it is exposed to ambient air, and therefore, provides a consistent source of accurate temperature data. You must
pair the tempe with your watch to display temperature data from the tempe.
Wireless Sensors
(Pairing Your Wireless Sensors, page
32).
53).
63).
®
CT10 golf club sensors. You can use paired club sensors to
53).
53).
(Pairing
(Wheel Size and
53
Advertisement
Table of Contents
